More than just power.

TM


AL1012M220 multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 220VAC 50/60Hz input into five (5) individual PTC protected 12VDC outputs (see specifications). Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.
  • Input:

  • Input 220VAC 50/60Hz, 1.6A.
  • Input fuse rated @ 3.5A./250V.
  • Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
  • Output:

  • 12VDC outputs.
  • 10A. supply current.
  • Five (5) individual PTC protected outputs, rated @ 2A.
  • Output relay energizes when unit is triggered (form "C" contact rated 1A. @ 28VDC).
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
  • Current limit is 2A. per output.
  • Battery Backup:

  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails (zero voltage drop).
  • Supervision:

  • AC fail supervision (form "C" contact).
  • Low battery supervision (form "C" contact).
  • Battery presence supervision (form "C" contact).
  • Power fail supervision relay (form "C" contact rated 1A. @ 28VDC).
  • Visual Indicators:

  • DC output LED indicator.
  • LEDs indicate condition of power outputs.
  • Power & input trigger LEDs.
  • Electrical:

  • Operating temperature: 0° C to 49° C ambient.
  • BTU/Hr.: 61.42 BTU/hr.
  • System AC input VA requirement: 352VA.
  • Lifetime Warranty
  • Enclosure:

  • Wall mount enclosure for indoor use.
  • Accommodates up to one (1) 12VDC/12AH battery.
  • Dimensions 15.5"H x 12.25"W x 4.5"D (394mm H x 311mm W x 114mm D)
  • 1.125" and 1.375" combination knockouts.
  • Weights (approximate):

  • Product Weight: 8.95 Lbs (4.06 kg)
  • Shipping Weight: 10.25 Lbs (4.65 kg)
 

Your message has been sent!

Compare ...

 

Products Similar to

Other