More than just power.


eBridge1PCRM and eBridge1PCTX are CAT5 to Coax cable Ethernet adapters/Media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 10/100Base-T Ethernet digital communication to be transmitted over Coax cable. An eBridge1PCRM receiver is powered by a PoE midspan or endspan product, such as a NetWay8M and NetWay16M and sends its power over the coax to the eBridge1PCTX transmitter under PoE protocol. This enables the eBridge1PCRM to be used in a managed manner, allowing for remote camera reset. The eBridge1PCTX, in turn, delivers that PoE+ compliant power to a PoE enabled camera or IP device. The eBridge1PCRM will not deliver power to non-compliant devices, thus avoiding damage to improperly connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 457m in comparison to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3). A maximum range from headend to the PoE camera/device is 610m taking into consideration that up to 100m of structured cable may be deployed at each end.


  • Retrofit digital IP cameras in an analog CCTV installation.
  • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras (see note, pg. 2).
  • Extend Network link distance in an industrial environment over 610m (see note, pg. 2).
  • Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.

  • Input:

  • Powered by midspan or endspan.
  • Local Aux. Input Power for eBridge1PCRM:
  • 24VDC/110mA or 24VAC/200mA.
  • Ethernet:

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5 or better structured cable.
  • Distance: up to 100m.
  • Speed: 10/100BaseT, half/full duplex, auto
  • negotiation. PoE compliant to IEEE 802.3af
  • (15W) and PoE+ compliant to IEEE 802.3at
  • (30W) delivered to camera by eBridge1PCTX.
  • Power provided by eBridge1PCRM to
  • eBridge1PCTX by PoE protocol.
  • Coax:

  • Distance: up to 457m (see Maximum Length of
  • Coax Type vs. Camera Power/PoE Class, pg. 3)
  • for power delivery of coax.
  • Throughput is rated to pass 25mbps of data at
  • distances up to 457m. With proper headend
  • equipment this supports Megapixel, HD720, HD1080.
  • Connectivity: BNC, RG-59/U or similar.
  • LED Indicators:

  • eBridge1PCRM:
  • Blue LED - Coax link connection (sloc).
  • Green - PoE ON.
  • Green - Power ON.
  • eBridge1PCRM and eBridge1PCTX:
  • Yellow and Green LED (RJ45) IP Link status,
  • 10/100Base-T/active.
  • eBridge1PCTX:
  • Blue LED - Coax link connection.
  • Green LED - PoE from eBridge1PCRM.
  • Environmental:

  • * Operating Temperature:

  • eBridge1PCRM:

  • -20° C to 49° C (-4° F to 120.2° F).
  • eBridge1PCTX:

  • For 15W: -40° C to 75° C (-40° F to 167° F).
  • For 30W: -40° C to 49° C (-40° F to 120.2° F).
  • Storage Temperature:
  • -30° to 70° C (-22° to 158° F).
  • Humidity: 20 to 85%, non-condensing.
  • Functions:

  • Auto detection and protection of legacy
  • non-PoE cameras/devices.
  • Lifetime Warranty
  • CE Approved
  • C-TICK Compliant (Z1409)
  • Single Port Hi-PoE Midspan Injector for Standard & Enhanced Power Network Infrastructure
    • Weights (approximate):

    • Product Weight: 0.318 Lbs (0.019 kg)
    • Shipping Weight: 0.485 Lbs (0.03 kg)

    Your message has been sent!

    Compare ...


    Products Similar to