More than just power.

TM


eBridge1PCR and eBridge1PCT are CAT5 to Coax cable Ethernet adapters that deliver data and power over the coax cable in a PoE compliant format. The paired set enables fast 10/100Base-T Ethernet digital communication to be transmitted over Coax cable. An eBridge1PCR receiver sends power over the coax to the eBridge1PCT transmitter under PoE protocol. The eBridge1PCT in turn delivers that PoE compliant power to a PoE enabled camera or IP device. eBridge1PCR will not deliver power to non-compliant devices, thus avoiding damage to improperly connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 457m in comparison to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3). A maximum range from headend to the PoE camera/device is 610m, taking into consideration that up to 100m of structured cable may be deployed at each end.

Applications:


  • Retrofit digital IP cameras in an analog CCTV installation.
  • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
  • Extend Network link distance in an industrial environment.
  • Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.

  • Input:

  • 24VDC Class 2 power supply (polarity not
  • observed) or 24VAC Class 2 plug-in transformer.
  • Power Consumption (under maximum load):

  • eBridge1PCR:
  • 24VDC/1,000mA or 24VAC/900mA.
  • eBridge1PCT: Powered by eBridge1PCR.
  • Ethernet:

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5 or better structured cable.
  • Distance: up to 100m.
  • Speed: 10/100BaseT, half/full duplex, auto
  • negotiation. PoE compliant to IEEE 802.3af (15W)
  • delivered to camera by eBridge1PCT.
  • Power provided by eBridge1PCR to
  • eBridge1PCT by PoE protocol.
  • Coax:

  • Distance: up to 457m (see Maximum Length of
  • Coax Type vs. Camera Power/PoE Class, pg. 3)
  • for power delivery of coax.
  • Throughput is rated to pass 25mbps of data at
  • distances up to 457m. With proper headend
  • equipment this supports
  • Megapixel, HD720, HD1080.
  • Connectivity: BNC, RG-59/U or similar.
  • LED Indicators:

  • * eBridge1PCR:

  • Blue LED - Coax link connection.
  • Yellow - PoE ON.
  • Green - Power ON.
  • * eBridge1PCR (RJ45):

  • Yellow and Green LED IP Link status,
  • 10/100Base-T/active.
  • * eBridge1PCT:

  • Blue LED - Coax link connection.
  • Green LED - PoE from eBridge1PCR.
  • Environmental:

  • Operating Temperature:
  • eBridge1PCR:

  • -20° C to +45° C (-4° F to 113° F).
  • eBridge1PCT:

  • For 15W: -40° C to 75° C (-40° F to 167° F).
  • Storage Temperature:

  • -30° C to +70° C (-22° F to 158° F).
  • Humidity: 20 to 85%, non-condensing.
  • Functions:

  • Auto detection and protection of legacy
  • non-PoE cameras/devices.
  • Lifetime Warranty
  • CE Approved
  • C-TICK Compliant (Z1409)
  • One (1) eBridge1PCR:
    IP and PoE over Coax Receiver.
  • One (1) eBridge1PCT:
    IP and PoE over Coax Hardened Transceiver.
    • Weights (approximate):

    • Product Weight: 0.4 Lbs (0.18 kg)
    • Shipping Weight: 1 Lbs (0.45 kg)
     

    Your message has been sent!

    Compare ...

     

    Products Similar to

    Other