More than just power.

TM


Altronix eBridge800PCRM and eBridge100TM/eBridge100ST are CAT5e to Coax cable Ethernet adapters/Media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 100Base-T Full Duplex Ethernet digital communication to be transmitted over Coax cable. The eBridge800PCRM receivers are powered by any UL Listed, PoE midspan or endspans and pass power over the coax to the eBridge100TM/eBridge100ST hardened transceivers. This enables the eBridge800PCRM to be used in a managed manner, allowing for remote camera reset. The eBridge100TM/eBridge100ST, in turn, passes PoE+ compliant power to a PoE enabled camera or IP device. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 300m in comparison to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3).

Applications:


  • Retrofit digital IP cameras in an analog CCTV installation.
  • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras (see note, pg. 2).
  • Extend Network link distance in an industrial environment (see note, pg. 2).
  • Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.

  • Compatible Transceivers:

  • eBridge100TM: Hardened transceiver.
  • eBridge100ST: Hardened mini transceiver.
  • Input:

  • Powered by a UL Listed limited power source,
  • PoE midspan or endspan.
  • Ethernet:

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5e or better structured cable.
  • Distance: up to 100m.
  • Speed: 100BaseT, 100mbps full duplex, auto negotiation.
  • PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to
  • IEEE 802.3at (30W)
  • Delivered to camera by eBridge100TM/eBridge100ST.
  • Power provided by eBridge800PCRM to
  • eBridge100TM/eBridge100ST by PoE protocol.
  • Coax:

  • Distance: up to 300m (see Maximum Length of Coax Type vs.
  • Camera Power/PoE Class, pg. 5) for power delivery of coax.
  • Throughput is rated to pass 100mbps of data at distances up to
  • 300m full duplex. With proper headend equipment,
  • this supports Megapixel, HD720, HD1080.
  • Connectivity: BNC, RG-59/U or similar.
  • LED Indicators:

  • eBridge800PCRM:

  • Blue LED (near BNC) - Coax link connection.
  • Yellow and Green LED (RJ45) IP Link status,
  • 100Base-T/active.
  • eBridge100TM:

  • Green - PoE ON (by respective RJ45 jack).
  • Yellow and Green LED (RJ45) IP Link status,
  • 100Base-T/active.
  • eBridge100ST:

  • Green - PoE ON (by respective RJ45 jack).
  • Yellow and Green LED (RJ45) IP Link
  • status, 10/100Base-T/active.
  • Blue: Coax Link is active.
  • Environmental:

  • Operating Temperature:
  • eBridge800PCRM:

  • -20° C to 49° C (-4° F to 120.2° F).
  • eBridge100TM:

  • For 15W: -40° C to 75° C (-40° F to 167° F).
  • For 25W: -40° C to 70° C (-40° F to 158° F).
  • For 30W: -40° C to 49° C (-40° F to 120.2° F).
  • eBridge100ST:

  • For 15W: -40° C to 75° C (-40° F to 167° F).
  • For 30W: -40° C to 60° C (-40° F to 140° F).
  • Storage Temperature: -30° C to 70° C (-22° F to 158° F).
  • Humidity: 20 to 85%, non-condensing.
  • Operating Altitude:

  • -304.8 to 2,000m (-1000 to 6,561.679 ft.).
  • Lifetime Warranty
  • CE Approved
  • C-TICK Compliant (Z1409)
  • IP and PoE/PoE+ over Coax Hardened Transceiver for Extended Distances
  • EoC and PoE/PoE+ Hardened Mini-Transceiver
  • Rack Chassis:

  • Modular 1U standard EIA 19" rack mount chassis.
  • Dimensions 1.625"H x 19.125"W x 8.5"D (42mm H x 486mm W x 216mm D)
  • Weights (approximate):

  • Product Weight: 5.8 Lbs (2.63 kg)
  • Shipping Weight: 7.8 Lbs (3.54 kg)
 

Your message has been sent!

Compare ...

 

Products Similar to

Other