More than just power.


Altronix eFlow102NX8 is a power supply/charger that converts a 120VAC 60Hz input into eight (8) fuse protected 12VDC outputs with a total of 10A. max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
  • Input:

  • 120VAC, 60Hz, 3.5A.
  • Input fuse: 5A/250V.
  • Output:

  • Eight (8) fuse protected outputs.
  • Outputs are rated @ 2.5A.
  • 12VDC @ 10.0A. supply current.
  • Auxiliary Power-Limited output rated @ 1A. (unswitched).
  • Over Voltage Protection.
  • Battery Backup:

  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
  • Supervision:

  • AC fail supervision (form "C" contacts).
  • - Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
  • Battery fail & presence supervision (form "C" contacts).
  • Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • Fire Alarm Disconnect:

  • Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
  • Electrical:

  • - Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: -20° C to 70° C ( -4° F to 158° F).
  • Relative Humidity 85% +/-5%.
  • - BTU/Hr (approx.): 61 BTU/Hr.
  • System AC input VA requirement: 420VA.
  • Visual Indicators:

  • Green AC Power LED indicates 120VAC present.
  • AC input, DC output and Battery LED indicators.
  • Additional Features:

  • Short circuit and overload protection.
  • Unit is complete with power supply, enclosure, battery leads and cam lock.
  • Lifetime Warranty
  • CUL Listed - ULC-S318-96 - Power Supplies for Burglar Alarm Systems. Also suitable for Access Control. download cUL file
  • CE Approved
  • Two (2) Port Connectivity Module
  • Enclosure:

  • Wall mount enclosure for indoor use.
  • Accommodates up to one (1) 12VDC/12AH battery.
  • Dimensions 15.5"H x 12.25"W x 4.5"D (394mm H x 311mm W x 114mm D)
  • 1.125" and 1.375" combination knockouts.
  • Weights (approximate):

  • Product Weight: 8.6 Lbs (3.9 kg)
  • Shipping Weight: 9.7 Lbs (4.4 kg)

Your message has been sent!

Compare ...


Products Similar to