More than just power.


Altronix eFlow6N16DV is a power supply/charger that converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into sixteen (16) PTC protected selectable 12VDC or 24VDC outputs with a total of 6A. max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
  • Input:

  • 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.5A.
  • Input fuse: 5A./250V.
  • Output:

  • Sixteen (16) PTC protected outputs.
  • 12VDC or 24VDC @ 6.0A. supply current.
  • Outputs are rated at 2A.
  • Auxiliary output rated @ 1A. (unswitched).
  • Overvoltage protection.
  • Battery Backup:

  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
  • Supervision:

  • AC fail supervision (form "C" contacts).
  • - Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
  • Battery fail and presence supervision (form "C" contacts).
  • Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • Fire Alarm Disconnect:

  • Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
  • Electrical:

  • - Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: -20° C to 70° C ( -4° F to 158° F).
  • Relative Humidity 85% +/-5%.
  • - BTU/Hr (approx.):
  • 12VDC: 37 BTU/Hr.
  • 24VDC: 74 BTU/Hr.
  • System AC input VA requirement: 550VA.
  • Visual Indicators:

  • Green AC Power LED indicates 220VAC present.
  • AC input, DC output, and Battery LED indicators.
  • Additional Features:

  • Short circuit and overload protection.
  • Unit is complete with power supply, enclosure, battery leads, and cam lock.
  • Lifetime Warranty
  • CE Approved
  • Two (2) Port Connectivity Module
  • Enclosure:

  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/7AH batteries.
  • Dimensions 13.5"H x 13"W x 3.25"D (343mm H x 330mm W x 83mm D)
  • 1/2" and 3/4" combination knockouts.
  • Weights (approximate):

  • Product Weight: 6.8 Lbs (3.08 kg)
  • Shipping Weight: 7.7 Lbs (3.49 kg)

Your message has been sent!

Compare ...


Products Similar to