More than just power.


Altronix LINQ2 network module is designed to interface with eFlow and MaximalF power supply/chargers. It enables power supply status monitoring and control of two (2) eFlow power supply/chargers over a LAN/WAN or USB connection. LINQ2 provides values on demand for AC fault status, DC current and voltage, as well as Battery fault status and reports conditions via SNMP.
  • Management interface for up to two (2) eFlow power supply/chargers.
  • Two (2) network controlled Form "C" relays.
  • Local and remote control of DC power outputs.
  • Battery service date indication.
  • SNMP trap message notifications (instant and delayed).
  • Connect up to five (5) local or remote trap receivers.
  • E-mail notification selectable by event.
  • Event log tracks history.
  • Programmable via USB or web browser.
  • Management interface software included (USB flash drive).
  • Includes interface cables and mounting bracket (attached).
  • Status Monitoring:

  • AC status.
  • Output current draw.
  • Unit's temperature.
  • DC output voltage.
  • Low Battery/Battery presence detection.
  • Setup:

  • Site ID identifies installation location
  • Power supply/charger calibration
  • DC output(s) control
  • Relay control (remotely operate HVAC, lighting or security systems).
  • Environmental:

  • Operating temperature: -20° to 49° C (-4° to 120.2° F).
  • Storage temperature: -30° C to 70° C (-22° to 158° F).
  • Lifetime Warranty
  • Dimensions (approximate):

  • 3.65"W x 3.25"L x 0.96"H (92.7mm W x 82.55mm L x 24.38mm H)
  • Weights (approximate):

  • Product Weight: 0.4 Lbs (0.18 kg)
  • Shipping Weight: 0.7 Lbs (0.32 kg)

Your message has been sent!

Compare ...


Products Similar to