More than just power.

TM


Pace1ST is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via Cat5e or higher cable in a PoE(+) compliant format. The Pace1ST will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1ST transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m.

Applications:


  • Retrofit digital IP cameras in an analog CCTV CAT5e installations.
  • Extend Network link distance in an industrial environment over 610m.
  • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper headend equipment.

  • Input:

  • PoE (15W) IEEE 802.3af compliant or PoE+ (30W)
  • IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.
  • Ethernet:

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5e or a single twisted pair UTP.
  • Speed: 10/100BaseT, half/full duplex, auto negotiation.
  • PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1ST.
  • Throughput is rated to pass 100mbps of data.
  • CAT5e or Higher:

  • Distance: up to 500m @ 100mbps.
  • LED Indicators:

  • Green - PoE ON (by respective RJ45 jack).
  • Yellow and Green LED IP Link status, 10/100Base-T/active.
  • Environmental:

  • Operating Temperature:
  • For 15W: -40° C to 75° C (-40° F to 167° F).
  • For 30W: -40° C to 65° C (-40° F to 149° F).
  • Storage Temperature:
  • -40° C to 75° C (-40° F to 167° F).
  • Relative humidity: 20 to 85%, non-condensing.
  • Operating Altitude: - 1000 to 6,561.679 ft. (- 304.8 to 2000m).
  • Functions:

  • Auto detection and protection of legacy non-PoE cameras/devices.
  • Lifetime Warranty
  • CE Approved
  • IP and PoE+ Receiver over extended distance UTP or CAT5e
  • Four (4) port IP and PoE+ Over Extended Distance CAT5e Receiver
  • Eight (8) port IP and PoE+ Over Extended Distance CAT5e Receiver
  • Sixteen (16) port IP and PoE+ Over Extended Distance CAT5e Receiver
  • Modular Case Dimensions (approximate):

  • 2.27"W x 2.645"D x 1.12"H (57.66mm W x 67.18mm D x 28.44mm H)
  • Weights (approximate):

  • Product Weight: 0.22 Lbs (0.1 kg)
  • Shipping Weight: 0.4 Lbs (0.18 kg)
  • IP and PoE+ over Extended Distance UTP or CAT5e
 

Your message has been sent!

Compare ...

 

Products Similar to

Other