eBridge100ST

EoC Single Port Small Transceiver, 100Mbps, Passes PoE/PoE+, Requires Compatible Receiver

Altronix eBridge100ST EoC hardened transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 300m.

Compatible Receivers
- eBridge100RM, eBridge400PCRM,
- eBridge800PCRM, and eBridge1600PCRM.
- eBridge800E
- Visit www.altronix.com for the latest compatibility list.
Input
- Operating power provided by eBridge receiver.
- Current draw: 1.5W
- PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) from eBridge receivers.*
Coax link
- Throughput is rated to pass 100Mbps of data at distances up to 300m.for power delivery.
- Connectivity: BNC, RG-59/U or similar.
Ethernet
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5.
- Distance: up to 100m.
- Speed: 10/100BaseT, half/full duplex, auto negotiation.
LED Indicators
- Green - PoE ON (by respective RJ45 jack).
- Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
- Blue: Coax Link is active.
Temperature
Operating Altitude
- - 304.8 to 2,000m (-1000 to 6,561.679 ft.).
Functions
- Auto detection and protection of legacy non-PoE cameras/devices.