AL125ULB

Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1A, 24VAC, Board

Altronix AL125ULB two (2) output switching Power Supply/Charger converts a low voltage AC input into two (2) individually PTC protected 12VDC or 24VDC outputs.

  • Input
    • 24VAC, 40VA from UL Listed, Class 2 transformer.
    • Access control trigger input.
  • Output
    • 12VDC or 24VDC selectable outputs.
    • 1A supply current.
    • Two (2) Class 2 Rated power limited outputs.
    • Fail-Safe/Fail-Secure lock output (switched).
    • Auxiliary power output (unswitched).
    • PTC protected outputs, rated @ 2.5A.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Maximum charge current: 400mA.
    • Automatic switch over to stand-by battery when AC fails.
    • (Batteries are sold separately).
  • Supervision
    • Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).
  • Indicator (LED)
    • Unit Status: Normal / No Output / Loss of AC / Triggered.
  • Temperature
    • Operating Temperature: 0° C to 49° C (32° F to 120° F).
    • Storage Temperature: - 20° C to 70° C ( -4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.): 6 or 12 BTU/Hr.
    • System AC input VA requirement: 55.2VA
 
NFPA 101 (Life Safety)
Dimensions (approximate):
  • 3.5"W x 3.9"L x 1.4"H (88.9 mm W x 99.6 mm L x 35.56 mm H).
Weights (approximate):
  • Product Weight: 1.4 Lbs. (0.64 kg).
  • Shipping Weight: 1.6 Lbs. (0.73 kg).