AL175ULX

Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1.75A, 115VAC, BC300 Enclosure

Altronix AL175ULX is a Two (2) Output Switching Power Supply/Charger that converts a 115VAC 60Hz input, into two (2) individually PTC protected 12VDC or 24VDC outputs.

  • Input
    • Input 115VAC, 60Hz, 0.6A.
    • Access control trigger input.
  • Output
    • 12VDC or 24VDC selectable outputs.
    • 1.75A supply current.
    • Two (2) Class 2 Rated power limited outputs.
    • Fail-Safe/Fail-Secure lock output (switched).
    • Auxiliary power output (unswitched).
    • PTC protected outputs, rated @ 2.5A.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Backup
    • Automatic switch over to stand-by battery when AC fails.
    • Maximum charge current: 400mA.
    • (Batteries are sold separately).
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).
  • Visual Indicators
    • AC input and DC output LED indicators.
  • Temperature
    • Operating 0ºC to 49ºC (32ºF to 120ºF).
    • Storage - 20ºC to 70ºC ( - 4ºF to 158ºF).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr. (approx.):
        • 12VDC: 11 BTU/Hr.
        • 24VDC: 22 BTU/Hr.
    • System AC input VA requirement: 69VA.
UL Listed For:
Access Control System Units (UL294)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
 
CSFM - California State Fire Marshal Approved
 
MEA - NYC Department of Buildings Approved
 
NFPA 101 (Life Safety)
Enclosure:
  • Wall mount enclosure for indoor use.
  • Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D).
  • 1/2" and 3/4" combination knockouts.
Weights (approximate):
  • Product Weight: 8.4 Lbs. (3.81 kg).
  • Shipping Weight: 9.4 Lbs. (4.263 kg).
Print
*Batteries sold separately
*Mounting hardware included.