Entrada2DMK

IP Access Control FACP Adapter Kit, Provides FAI for 2 Locks while maintaining PoE to Access Control Panel, Includes Receiver and Transmitter

These adapters are specifically designed to interface with Network Door Controllers. They route power (PoE/PoE+) from a PoE switch or Midspan to the Network Door Controller and accommodate up to two (2) Fail-Secure strikes or Fail-Safe mag locks. The receiver features a supervised Fire Alarm Disconnect which releases locking devices while maintaining power to the Network Door Controller. The Fire Alarm Interface feature allows multiple units to be interconnected enabling any or all to be affected from a single FACP trigger input.

Input Power
- For UL 60950-1 use a UL Listed Endspan/Midspan LPS limited power source.
- For UL 294 use a UL Listed PoE/PoE+ (IEEE 802.3af/at) Midspan/Endspan.
Power Output
- Both lock outputs are selectable for either 12VDC or 24VDC and rated @ 8W (12V/667mA, 24V/333mA) each maximum (16W combined). Total power rated @ 30W (PoE and lock power).
Trigger Input
- 12VDC-24VDC shutdown trigger (Receiver).
- Two (2) independent 12VDC-24VDC access control trigger inputs (Transmitter).
Fire Alarm Disconnect
- Supervised Fire Alarm Disconnect is selectable for Normally Open (N.O.) or Normally Closed (N.C.) trigger input.
Ethernet
- Connectivity: RJ45.
- Wire type: 4-pair CAT-5 or higher structured cable.
- Distance: 100m max.
- Speed: 10/100BaseT.
LED Indicators
Environmental
- Operating Ambient Temperature:
- Total power DC output plus PoE output not to exceed 30W.
- Storage Temperature: - 20° C to 75° C ( - 4° F to 167° F).
- Relative humidity: 85%, +/- 5%, non-condensing.
- Operating Altitude: - 304.8 to 2000m.