T2M35XK1
8-Door Altronix/Mercury Access and Power Integration Wired Networked Kit - Trove2M2 and TMV2 (Door backplane) with eFlow6NB, eFlow102NB, (2) ACM8, RSB2, wire harnesses and finger duct
Altronix T2M35XK1 is an 8-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2M35XK1 accommodates one (1) Intelligent Dual Reader Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications. *Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Specifications
eFlow6NB Power Supply/Charger -1
Input
- Voltage: 120VAC, 60Hz, 3.5A.
- Fusing: 5A / 250V.
Outputs
- Voltage: 24VDC.
- Current: 6A continuous
- Auxiliary: 1A (unswitched).
- Other: Overvoltage protection. Filtered and regulated.
eFlow102NB Power Supply/Charger - 2
Input
- Voltage: 120VAC, 60Hz, 3.5A.
- Input Fuse: 5A / 250V.
Output
- Voltage: 12VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
Both Power Supplies
Battery Charging
- Capacity: 12VDC/7AH (4 within enclosure); 40AH/65AH (requires separate enclosure).
- Type: Sealed lead acid or gel type.
- Failover: Upon AC loss, instantaneous.
- (Batteries are sold separately).
Fire Alarm Disconnect
- Supervised: Latching or non-latching.
- EOL: 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- AC Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Two (2) ACM8 Access Power Controllers
Input
- ACM8 1: 24VDC from eFlow6NB
- ACM8 2: 12VDC from eFlow102NB
- Input Fuse: 10A/250V
Outputs
- ACM8 1: 24VDC
- ACM8 2: 12VDC
Each ACM8:
- Eight (8) independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
- b) Auxiliary power outputs (unswitched).
- c) Any combination of the above.
- Output Fuses: 3.5A / 250V.
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized).
- Green LED: FACP disconnect is triggered.
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.):
- 136 BTU/Hr.
Agency Listings
Accessories
| Name | Description |
|---|---|
| LINQ2 | Network Communication Module, Control, Monitor and Report Power Supply Diagnostics, Compatible with eFlow Series and MaximalF Power Supply/Chargers |
| WM5 | Magnetic Cable Tie Mounts |
| WM25 | Magnetic Cable Tie Mounts |
| WM100 | Magnetic Cable Tie Mounts |
| MM4 | Mounting Magnets, Four (4) Quantity per Pack |
| MM8 | Mounting Magnets, Eight (8) Quantity per Pack |
| MM12 | Mounting Magnets, Twelve (12) Quantity per Pack |
| MM24 | Mounting Magnets, Twenty Four (24) Quantity per Pack |
| BR1 | Add-On Mounting Bracket |
| Trove2BWC | Battery/Wire Trough Enclosure |
Dimensions & Weight
Enclosure:
- Wall mount enclosure for indoor use.
- Accommodates up to four (4) 12VDC/7AH Batteries.
- Dimensions 21.5"W x 27.25"H x 6.5"D (546.1 mm W x 692.15 mm H x 165.1 mm D).
- 3/4" and 1" combination knockouts.
Weights (approximate):
- Product Weigtht: 49.8 Lbs. (22.59 kg).
- Shipping Weigtht: 53.6 Lbs. (24.29 kg).