T2M75CK1DQ
14-Door Altronix/Mercury Access and Power Integration Wired Networked Kit - Trove2M2 and TMV2 (Door backplane) with eFlow104NB, eFlow102NB, (2) LINQ8ACMCB, (2) LINQ8PDCB, RSB2, Wire harnesses for one (1) LP1502 and seven (7) MR52
Altronix T2M75CK1DQ is a 14-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2M75CK1DQ accommodates one (1) Intelligent Dual Reader Controller and seven (7) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications. *Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Specifications
eFlow104NB Power Supply/Charger - 1
Input
- Voltage: 120VAC, 60Hz, 4.5A.
- Input Fuse: 6.5A / 250V.
Output
- Voltage: 24VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
eFlow102NB Power Supply/Charger - 2
Input
- Voltage: 120VAC, 60Hz, 3.5A.
- Input Fuse: 5A / 250V.
Output
- Voltage: 12VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
Both Power Supplies
Battery Charging
- Capacity: 12VDC/7AH (4 within enclosure); 40AH/65AH (requires separate enclosure).
- Type: Sealed lead acid or gel type.
- Failover: Upon AC loss, instantaneous.
- (Batteries are sold separately).
Fire Alarm Disconnect
- Supervised: Latching or non-latching.
- EOL: 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- AC Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Two (2) LINQ8PDCB Network Power Distribution Modules
Input
- Voltage: 24VDC from eFlow102NB
- Input Fuses: 15A/32V
Outputs
- Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Output PTCs:
- 2.5A
Status Monitoring
- Power Supply output voltage and load, Voltage and load of each output
- FACP trigger and reset status, Unit temperature (Celsius)
- Power Supply AC and Battery status, Battery health
Reporting:
- Windows Dashboard Alert messages
- E-mail notifications, Event Log tracks history
Indicators (LED)
- Bat Local: Charging current status
- FACP: Triggered / Released
- Input: Input signal
- Out1 - Out8: Output status
Two (2) LINQ8ACMCB Networked Access Power Controllers
Input
- Voltage: 24VDC from eFlow104NB
- Input PTCs: 9A
Outputs
- PTC protected auto-resettable outputs
- Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Output PTCs:
- 2.5A
Programming Features:
Eight (8) Programmable Outputs:
- - Fail-safe, fail-secure or auxiliary outputs
- - Input controlled or manually controlled through software
- - High (over) and low (under) voltage and current monitoring by output
- - Multiple outputs may be programmed to be triggered by a single input
- - Battery back-up by output
Eight (8) Programmable Trigger Inputs:
- - Normally open (NO), Normally closed (NC) or Open collector sink inputs
- - Wet Input (5VDC - 24VDC) with 10k resistor
- - Any combination of the above
Other Programmable Trigger Inputs:
- - Monitor power supply(ies) input for voltage and current limits (high/low)
- - Input and output current calibration, Programmable timer events
- - Programmable user levels, Enable or disable alerts by type
- - Programmable alert reporting delay
Indicators (LED)
- Green AC LED: indicates AC trouble condition
- Green BAT LED: indicates battery trouble condition
- Green FACP LED: indicates FACP disconnect is triggered
- Flashing Blue Heartbeat LED: indicates network connection
- Individual OUT1 - OUT8 Red LEDs: indicate outputs are triggered
- Individual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red)
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.):
- 221 BTU/Hr.
Agency Listings
CE Compliant
Accessories
| Name | Description |
|---|---|
| WM5 | Magnetic Cable Tie Mounts |
| WM25 | Magnetic Cable Tie Mounts |
| WM100 | Magnetic Cable Tie Mounts |
| MM4 | Mounting Magnets, Four (4) Quantity per Pack |
| MM8 | Mounting Magnets, Eight (8) Quantity per Pack |
| MM12 | Mounting Magnets, Twelve (12) Quantity per Pack |
| MM24 | Mounting Magnets, Twenty Four (24) Quantity per Pack |
| BR1 | Add-On Mounting Bracket |
| Trove2BWC | Battery/Wire Trough Enclosure |
Dimensions & Weight
Enclosure:
- Wall mount enclosure for indoor use.
- Accommodates up to four (4) 12VDC/7AH Batteries.
- Dimensions 21.5"W x 27.25"H x 6.5"D (546.1 mm W x 692.15 mm H x 165.1 mm D).
- 3/4" and 1" combination knockouts.
Weights (approximate):
- Product Weigtht: 85.6 Lbs. (38.83 kg).
- Shipping Weigtht: 98.8 Lbs. (44.82 kg).