T2RM3CK4PQ
8-Door Altronix/Mercury Access and Power Integration Wired Rack Kit - Trove2M2R with eFlow6RLB, ACMS8, LINQ8PD, VR6
Altronix T2RM3CK4PQ is a 8-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2RM3CK4PQ accommodates one (1) Intelligent Dual Reader Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications. *Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Specifications
eFlow6RLB Power Supply/Charger
Input
- Voltage: 120VAC, 60Hz. 3.5A max
- Fusing: 5A / 250V
Output
- Voltage: 24VDC @ 10A
- Auxiliary: 1A (unswitched)
- Protection: Overvoltage protection. Filtered and regulated.
Battery Charging
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
- (Batteries are sold separately).
Fire Alarm Disconnect
- Supervised: Latching or non-latching
- EOL: 10K Resistor
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- AC Input: 120VAC is present.
- DC Output: 24VDC is present.
- Battery: Discharged or not connected.
ACMS8 Access Power Controller
Input
- Voltage: 24VDC from eFlow6RLB and 12VDC from VR6.
- Fusing: 15A / 32V.
Output
- Voltage: 12 or 24VDC individually selectable.
- Eight (8) selectable 12VDC - 24VDC independently controlled outputs or eight (8) independently controlled Form “C” relay outputs:
- a) Fail-Safe and/or Fail-Secure power outputs.
- b) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.
- c) Auxiliary power outputs (unswitched).
- d) Any combination of the above.
- Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.
- Individual outputs may be set to OFF position for servicing.
- Fuses Rating: 3A / 32V.
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized).
- Blue LED: FACP disconnect is triggered.
Individual voltage LEDs
- Green: 12VDC
- Red: 24VDC
VR6 Voltage Regulator
Input
- Voltage: 24VDC from eFlow6RLB.
Output
- Voltage: 12VDC.
- Current: 6A continuous.
- Other: Surge suppression.
Indicators (LED)
- Input: 24VDC is present.
- Output: Powered.
LINQ8PD Network Power Distribution Module
Input
- Voltage: 24VDC from eFlow6RLB and 12VDC from VR6
- Input Fuses 15A/32V
Outputs
- Fuse protected outputs.
- Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Output Ratings:
- Output Fuses: 3A/32V
Status Monitoring
- Power Supply output voltage and load, Voltage and load of each output
- FACP trigger and reset status, Unit temperature (Celsius)
- Power Supply AC and Battery status, Battery health
Reporting:
- Windows Dashboard Alert messages
- E-mail notifications, Event Log tracks history
Indicators (LED)
- Bat Local: Charging current status
- FACP: Triggered / Released
- Input: Input signal
- Out1 - Out8: Output status
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- 85% +/- 5%.
BTU/Hr. (approx.):
- 67 BTU/Hr.
Agency Listings
Accessories
| Name | Description |
|---|---|
| RE2 | Rack Mount Battery Enclosure, 2U |
| WM5 | Magnetic Cable Tie Mounts |
| WM25 | Magnetic Cable Tie Mounts |
| WM100 | Magnetic Cable Tie Mounts |
| MM4 | Mounting Magnets, Four (4) Quantity per Pack |
| MM8 | Mounting Magnets, Eight (8) Quantity per Pack |
| MM12 | Mounting Magnets, Twelve (12) Quantity per Pack |
| MM24 | Mounting Magnets, Twenty Four (24) Quantity per Pack |
Dimensions & Weight
Enclosure:
- Trove Rack Mount Enclosure
- Accommodates up to four (4) 12VDC/7AH Batteries.
- Dimensions 19"W x 3.25"H x 33.25"D (482.6 mm W x 82.6 mm H x 844.6 mm D).
Weights (approximate):
- Product Weigtht: 40.5 Lbs. (18.37 kg).
- Shipping Weigtht: 45.5 Lbs. (20.64 kg).