T3M75CK3Q
16-Door Altronix/Mercury Access and Power Integration Wired Networked Kit - Trove3M3 with eFlow104NB, eFlow102NB, (2) LINQ8ACM, (2) VR6, (2) LINQ8PD, NetWay5B, BR1, RSB2, Wire harnesses for eight (8) MR52
Altronix T3M75CK3Q is a 16-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T3M75CK3Q accommodates eight (8) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications. *Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Specifications
eFlow104NB Power Supply/Charger - 1
Input
- Voltage: 120VAC, 60Hz, 4.5A.
- Main Fuse: 6.5A / 250V.
Output
- Voltage: 24VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
eFlow102NB Power Supply/Charger - 2
Input
- Voltage: 120VAC, 60Hz, 3.5A.
- Input Fuse: 5A / 250V.
Output
- Voltage: 12VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Protection: Overvoltage protection. Filtered and regulated.
Both Power Supplies
Battery Charging
- Capacity: 12VDC/12AH (4 within enclosure); 40AH/65AH (requires separate enclosure).
- Type: Sealed lead acid or gel type.
- Failover: Upon AC loss, instantaneous.
- (Batteries are sold separately).
Fire Alarm Disconnect
- Supervised: Latching or non-latching.
- EOL: 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- AC Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Two (2) LINQ8ACM Networked Access Power Controllers
Input
- Voltage: 24VDC from eFlow104NB and 12VDC from VR6
- Input Fuses: 15A/32V
Outputs
- Fused outputs rated @ 3A per output, Total output 16A max.
- Do not exceed the individual power supply ratings
- Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.
- Individual outputs may be set to OFF position for servicing.
Output Fuses:
- 3A/32V each
- Total output current is determined by the power supply(ies), not to exceed a maximum of 10A for each input.
Programming Features:
Eight (8) Programmable Outputs:
- - Fail-safe, fail-secure or auxiliary outputs
- - Input controlled or manually controlled through software
- - High (over) and low (under) voltage and current monitoring by output
- - Multiple outputs may be programmed to be triggered by a single input
- - Battery back-up by output
Eight (8) Programmable Trigger Inputs:
- - Normally open (NO)
- - Normally closed (NC)
- - Open collector sink inputs.
- - Wet Input (5VDC - 24VDC) with 10k resistor
- - Any combination of the above
Other Programmable Trigger Inputs:
- - Monitor power supply(ies) input for voltage and current limits (high/low)
- - Input and output current calibration
- - Programmable timer events
- - Programmable user levels
- - Enable or disable alerts by type
- - Programmable alert reporting delay
Fire Alarm Disconnect:
- Supervised: Inactive, latching or non-latching, individually selectable for any or all of the eight (8) outputs
- EOL: 10K Resistor
Indicators (LED)
- Green AC LED: indicates AC trouble condition
- Green BAT LED: indicates battery trouble condition
- Green FACP LED: indicates FACP disconnect is triggered
- Blue Heartbeat LED: indicates network connection
- Individual OUT1 - OUT8 Red LEDs: indicate outputs are triggered
- Individual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red)
Two (2) LINQ8PD Network Power Distribution Modules
Input
- Voltage: 24VDC from eFlow104NB and 12VDC from VR6
- Input Fuses: 15A/32V
Outputs
- Output Ratings: Fused outputs rated 3A/32V
- Other: Power output can be locally or remotely controlled
- Surge suppression
Status Monitoring
- Power Supply(ies) output voltage and load
- Voltage and load of each output
- FACP trigger and reset status
- Unit temperature (Celsius)
- Power Supply AC and Battery status
- Battery health
Indicators (LED)
- Bat Local: Charging current status
- FACP: Triggered / Released
- Input: Input signal
- Out1 - Out8: Output status
Reporting:
- Windows Dashboard Alert messages
- E-mail notifications
- Event Log tracks history
Programming Features:
- Power Supply(ies) voltage and load limits (High/Low)
- FACP trigger type (wet or dry-NO/NC)
- Input Function (FACP reset/tamper)
- Output Reset Trigger (NO/NC)
- Battery Monitor Configuration:
- - Battery condition (Low/Normal/Missing)
- - Service Date
- Configurable Output Relay(s).
- Individual Output Configuration:
- - Device ID
- - Voltage and Current Limits (High/Low)
- - FACP Trigger Setting (latching/non-latching/inactive)
- - Battery Backup
Fire Alarm Interface:
- Supervised FACP disconnect (Latching or Non-Latching)
- FACP reset (NC or NO)
Two (2) VR6 Voltage Regulators
Input
- Voltage: 24VDC from eFlow104NB
Output
- Voltage: 12VDC.
- Current: 6A continuous.
- Other: Surge suppression.
Indicators LED
- Input: 24VDC is present.
- Output: Powered.
NetWay5B 5-Port Hardened Switch
Input
- 12VDC, current draw: 150mA
Ethernet Ports:
- Five (5) 10/100/1000 Mbps ports.
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5 or better structured cable.
- Distance: up to 100m.
- Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
Indicators (LED)
- Individual PoE On LEDs for each port.
- Individual IP Link status, 10/100Base-T/active LEDs for each port.
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.):
- 217 BTU/Hr.
Agency Listings
CE Compliant
Accessories
| Name | Description |
|---|---|
| WM5 | Magnetic Cable Tie Mounts |
| WM25 | Magnetic Cable Tie Mounts |
| WM100 | Magnetic Cable Tie Mounts |
| MM4 | Mounting Magnets, Four (4) Quantity per Pack |
| MM8 | Mounting Magnets, Eight (8) Quantity per Pack |
| MM12 | Mounting Magnets, Twelve (12) Quantity per Pack |
| MM24 | Mounting Magnets, Twenty Four (24) Quantity per Pack |
| BR1 | Add-On Mounting Bracket |
| Trove3BWC | Trove Compatible Battery/Wire Enclosure |
| Trove3SWC | Trove Compatible Battery/Wire Enclosure |
Dimensions & Weight
Enclosure:
- Wall mount enclosure for indoor use.
- Accommodates up to four (4) 12VDC/12AH Batteries.
- Dimensions 30.12"W x 36.12"H x 7.06"D (768.1 mm W x 917.5 mm H x 179.3 mm D).
- 3/4" and 1" combination knockouts.
Weights (approximate):
- Product Weigtht: 85.6 Lbs. (38.83 kg).
- Shipping Weigtht: 98.8 Lbs. (44.82 kg).