Power Supply Charger, 4 PTC Class 2 Outputs, 24VDC @ 10A, 115VAC, Red BC400 Enclosure

AL1024ULXPD4CBR is a multi-output power supply/charger that converts a 115VAC, 60Hz input into four (4) 24VDC Class 2 Rated power-limited outputs.

  • Input
    • Input 115VAC, 60Hz, 4.2A.
    • Input fuse rated @ 3.5A./250V.
  • Output
    • 24VDC output.
    • 10A. of continuous supply current for Access Control applications.
    • 8A. of continuous supply current for Fire Alarm applications.
    • Four (4) Class 2 Rated PTC protected powerlimited outputs.
    • Outputs are rated @ 2.5A.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
  • Supervision
      • AC fail supervision (form "C" contacts).
        • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
    • Low battery supervision (form "C" contacts).
    • Battery presence supervision (form "C" contacts).
  • Visual Indicators
    • AC input and DC output LED indicators.
  • Electrical
    • Operating temperature: 0° C to 49° C ambient.
    • 122.84 BTU/Hr.
    • System AC input VA requirement: 483VA.
UL Listed For:
Access Control System Units (UL294)
Power Supplies for Fire Protective Signaling Systems (UL1481)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
NFPA 72 Compliant
  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/12AH Batteries.
  • Dimensions 12.25"W x 15.5"H x 4.5"D (311 mm W x 394 mm H x 114 mm D).
  • 1.125" and 1.375" combination knockouts.
Weights (approximate):
  • Product Weigtht: 10.1 Lbs. (4.58 kg).
  • Shipping Weigtht: 11.4 Lbs. (5.17 kg).