AL125ULP

Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1A, 24VAC, BC100 Enclosure, includes Plugin Transformer

AL125ULP is a Two (2) Output Switching Power Supply/Charger that converts a 24VAC @ 40VA input, into two (2) individually PTC protected 12VDC or 24VDC outputs.

  • Input
    • 24VAC, 40VA from UL Listed, Class 2 transformer.
    • Access control trigger input.
  • Output
    • 12VDC @ 1A. or 24VDC @ 0.5A. selectable outputs.
    • Two (2) Class 2 Rated power limited outputs.
    • Fail-Safe/Fail-Secure lock output (switched).
    • Auxiliary power output (unswitched).
    • PTC protected outputs, rated @ 2.5A.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
  • Supervision
    • Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).
  • Visual Indicators
    • AC power and unit status indicator on the front panel.
  • Temperature
    • Operating 0° C to 49° C (32° F to 120° F).
    • Storage - 20° C to 70ÂșC ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr (approx.):
        • 12VDC: 6 BTU/Hr.
        • 24VDC: 6 or 12 BTU/Hr.
    • System AC input VA requirement: 55.2VA.
  • Features
    • Includes power supply, plug-in transformer, enclosure and battery leads.
UL Listed For:
Access Control System Units (UL294)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
 
MEA - NYC Department of Buildings Approved
 
NFPA 101 (Life Safety)
Enclosure:
  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/4AH Batteries.
  • Dimensions 7.5"W x 8.5"H x 3.5"D (191 mm W x 216 mm H x 89 mm D).
  • 1/2" and 3/4" combination knockouts.
Weights (approximate):
  • Product Weigtht: 6.3 Lbs. (2.86 kg).
  • Shipping Weigtht: 6.8 Lbs. (3.08 kg).