Maximal77FE

Power Supply/Chargers, Expandable, Dual 24VDC outputs @ 9.7A each, 115VAC, FAI, LinQ2 Ready, BC800 Enclosure

Maximal77FE Expandable Power System provides system designers and installers with optimum power choices and the highest levels of versatility. It provides 24VDC via two (2) single output power supply/chargers. System includes AC fail, low battery and battery presence monitoring. Enclosure facilitates up to four (4) 12VDC/12AH batteries. All interconnecting equipment must be UL Listed.

  • Input
    • 120VAC 60Hz, 9.0A input.
  • Output
    • 24VDC outputs.
      • Maximum output current Options:
        • A) 24VDC @ 10A plus 24VDC @ 10A.
    • Non power-limited outputs.
    • Aux. power-limited output rated @ 1A (unswitched).
    • Over Voltage Protection.
  • Fuse Ratings
    • Power Supply input fuses rated @ 6.3A/250V.
  • Fire Alarm Disconnect
    • Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
    • Battery fail & presence supervision (form "C" contacts).
    • Low power shutdown. Prevents deep battery discharge.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
    • Battery fuses rated @ 15A/32V.
  • Visual Indicators
    • Green AC Power LED indicates 120VAC present.
    • AC input and DC output LED indicators.
  • Electrical
      • Temperature:
        • Operating: 0° C to 49° C (32° F to 120° F).
        • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.): 246 BTU/Hr.
    • System AC input VA requirement: 1080VA.
UL Listed For:
Access Control System Units (UL294)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
 
CSFM - California State Fire Marshal Approved
Enclosure:
  • Wall mount enclosure for indoor use.
  • Accommodates up to four (4) 12VDC/12AH Batteries.
  • Dimensions 19"W x 27"H x 6.25"D (483 mm W x 685.8 mm H x 159 mm D).
  • 1/2" and 3/4" combination knockouts.
Weights (approximate):
  • Product Weigtht: 32.6 Lbs. (14.8 kg).
  • Shipping Weigtht: 39.75 Lbs. (18 kg).