MOM5

Multi-Output Distribution Module, 5 PTC Class 2 Outputs, FAI, Board

Altronix MOM5 power distribution module converts one (1) non power-limited DC voltage input to five (5) power-limited outputs. Each output will route power to a variety of access control hardware and devices which includes Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both fail-safe and fail-secure modes. Controlled trigger input is achieved through normally open (NO) or normally closed (NC) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay will enable HVAC Shutdown, Elevator Recall or trigger auxiliary devices.

  • Input
    • 12VDC or 24VDC from power supply.
  • Outputs
    • 12VDC or 24VDC operation.
    • Current limit is 2A @ 12VDC or 24VDC per output.
    • Five (5) individual Class 2 Rated PTC protected power-limited outputs (auto-resettable).
  • PTC Ratings
    • PTCs are rated @ 2A/250V.
  • Visual Indicators
    • Red LEDs indicate condition of each power output.
    • Power and input trigger LEDs.
  • Supervision
    • Power fail supervision relay (Form "C" contact rated 1A @ 28VDC).
  • Additional Features
    • Output relay indicates that unit is triggered (Form “C” contact rated 1A @ 28VDC).
    • Interfaces with most DC Power Supplies.
  • Temperature
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
UL Listed For:
Access Control System Units (UL294)
Power Supplies for Fire Protective Signaling Systems (UL1481)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
 
MEA - NYC Department of Buildings Approved
 
NFPA 72 Compliant
 
CE Compliant
Dimensions (approximate):
  • 3.5"W x 5.25"L x 1"H (88.9 mm W x 133.35 mm L x 25.4 mm H).
Weights (approximate):
  • Product Weight: 0.3 Lbs. (0.13 kg).
  • Shipping Weight: 0.4 Lbs. (0.18 kg).