AL600ULXR

Power Supply Charger, Single Output, 12/24VDC @ 6A, 115VAC, Red BC300 Enclosure

AL600ULXR is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output.

  • Input
    • Input 115VAC, 60Hz, 3.5A.
  • Output
    • 12VDC or 24VDC selectable output.
    • 6A continuous supply current.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Charging
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
    • Low battery supervision (form "C" contacts).
    • Battery presence supervision (form "C" contacts).
  • Visual Indicators
    • AC input and DC output LED indicators.
  • Temperature
    • Operating 0° C to 49° C (32° F to 120° F).
    • Storage - 20° C to 70°C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr (approx.):
        • 12VDC: 37 BTU/Hr.
        • 24VDC: 74 BTU/Hr.
    • System AC input VA requirement: 402.5VA.
UL Listed For:
Access Control System Units (UL294)
View Certificate
Power Supplies for Fire Protective Signaling Systems (UL1481)
View Certificate
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
View Certificate
 
CSFM - California State Fire Marshal Approved
Download File
 
MEA - NYC Department of Buildings Approved
 
NFPA 72 Compliant
 
FM Approved
Enclosure:
  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/7AH Batteries.
  • Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D).
  • 1/2" and 3/4" combination knockouts.
Weights (approximate):
  • Product Weight: 7.05 Lbs. (3.2 kg).
  • Shipping Weight: 8.9 Lbs. (4.1 kg).
Print
*Batteries sold separately
Documentation
Lifetime Warranty Locate a Distributor