AL125ULX

Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1A, 115VAC, BC300 Enclosure

Altronix AL125ULX Series power-limited Power Supply/Chargers convert 115VAC 50/60Hz input into two individually PTC protected 12VDC or 24VDC outputs (see specifications). They are intended for use in applications requiring UL Listing for Access Control (UL294) and applications requiring an interface with Fire Alarm Control Panels.

  • Input
    • Input 115VAC, 50/60Hz, 0.6A.
    • Access control trigger input.
  • Output
    • 12VDC or 24VDC selectable outputs.
    • 1A supply current.
    • Two (2) Class 2 Rated power limited outputs.
    • Fail-Safe/Fail-Secure lock output (switched).
    • Auxiliary power output (unswitched).
    • PTC protected outputs, rated @ 2.5A.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
  • Supervision
    • Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).
  • Visual Indicators
    • AC power and unit status indicator on the front panel.
  • Temperature
    • Operating 0° C to 49° C (32° F to 120° F).
    • Storage - 20° C to 70ÂșC ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr (approx.):
        • 12VDC: 6 BTU/Hr.
        • 24VDC: 6 or 12 BTU/Hr.
    • System AC input VA requirement: 55.2VA.
UL Listed For:
Access Control System Units (UL294)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
 
MEA - NYC Department of Buildings Approved
 
NFPA 101 (Life Safety)
Enclosure:
  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/7AH Batteries.
  • Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D).
  • 1/2" and 3/4" combination knockouts.
Weights (approximate):
  • Product Weigtht: 9.5 Lbs. (4.31 kg).
  • Shipping Weigtht: 10.4 Lbs. (4.72 kg).