OLS120D2

Power Supply Charger, Single Output, 12/24VDC @ 4A, 115/220VAC, Board

OLS120D2 power supply/charger converts a 115VAC, 50/60Hz or 230VAC, 50/60Hz input to a 12VDC and 24VDC outputs (see specifications). This unit has a wide range of applications for access control and security system accessories that require additional power.

  • Input
    • Universal input 115VAC, 50/60Hz, 0.95A. or 230VAC, 50/60Hz, 0.6A.
  • Output
    • DC1 - 12 or 24VDC @ 3A. and DC2 - 12VDC @ 1A.
      • Note:
        • If DC2 is not used, DC1 rating is 12VDC or 24VDC rated @ 4A. max.
        • Filtered and electronically regulated output.
        • Short circuit and thermal overload protection.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries. Two (2) 12VDC batteries connected in series are required.
    • Automatic switch over to stand-by battery when AC fails.
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Low battery supervision (form "C" contacts).
  • Visual Indicators
    • AC input and DC output LED indicators.
  • Electrical
      • Temperature:
        • Operating: 0° C to 49° C (32° F to 120° F).
        • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr (approx.):
        • 12VDC: 25 BTU/Hr.
        • 24VDC: 49 BTU/Hr.
      • System AC input VA requirement:
        • 115VAC: 109.25VA.
        • 230VAC: 138VA.
  • Features
    • Power ON/OFF switch.
    • Includes battery leads.
Dimensions (approximate):
  • 4.5"W x 7.25"L x 1.79"H (114.3 mm W x 184.15 mm L x 45.466 mm H).
Weights (approximate):
  • Product Weigtht: 0.7 Lbs. (0.32 kg).
  • Shipping Weigtht: 0.9 Lbs. (0.4 kg).