T2SFKTT12SD

12-Door Altronix/Swiftlane Controls backplane Access and Power Integration Kit - Trove2SF2, (2) Tango1B, (2) ACMS8CB, NetWay5A, BR1

Altronix T2SFKTT12SD kit consists of Trove2 enclosure, TSF2 Swiftlane/Altronix backplane with two (2) Tango1B PoE Driven Power Supplies, one (1) 5-port hardened switch and two (2) 8-dual output PTC access power controllers.
This kit also accommodates up to three (3) Swiftlane Controls Door Controller 5 (SL-DCU-5) boards. Trove simplifies board layout and wire management, reduces installation time and labor costs.

  • Two (2) Tango1B PoE Driven Power Supply/Chargers
      • Ethernet Input
        • 802.3bt PoE up to 90W (or 802.3at up to 30W or 802.3af up to 15W)
      • Power Output (when using 802.3bt 90W)
        • 12VDC up to 5.4A (65W) and/or 24VDC up to 2.7A (65W)
        • Combined output not to exceed 65W
        • When charging batteries:
        • 12VDC up to 4.6A (55W) and/or 24VDC up to 2.3A (55W)
        • Combined output not to exceed 55W
      • Ethernet Output
        • Pass-through Ethernet Port (data only)
      • Battery Charging
        • Capacity: One (1) LiFePO4 battery within enclosure
        • Type: LiFePO4(lithium iron phosphate)
        • Failover: Upon AC loss, instantaneous
        • Unique technology allows for single battery to backup 12VDC and/or 24VDC systems
        • (Batteries are sold separately).
      • Supervision
        • Loss of PoE Input
        • Battery Supervision
      • Indicators (LED)
        • Input: Indicates input voltage is present
        • Output: Indicates normal operating condition
        • PoE Type: PoE Class Indicator
        • Supervision: PoE Fail or BAT Fail
  • NetWay5A 5-Port Hardened Switch
      • Input Power
        • 12VDC, current draw: 150mA
        • 24VDC, current draw: 75mA
      • Output
        • Five (5) data ports.
      • Ethernet Ports:
        • Five (5) 10/100 Mbps ports.
        • Connectivity: RJ45, auto-crossover.
        • Wire type: 4-pair CAT5 or better structured cable.
        • Distance: up to 100m.
        • Speed: 10/100 Mbps, half/full duplex, auto negotiation.
      • Indicators (LED)
        • Individual PoE On LEDs for each port.
        • Individual IP Link status, 10/100Base-T/active LEDs for each port.
  • Two (2) ACMS8CB Dual Input Access Power Controllers
      • Input
        • Voltage: 12VDC and 24VDC from Tango1B
        • Input PTCs: 9A.
      • Outputs
        • Voltage: 12 or 24VDC individually selectable.
        • Eight (8) selectable 12VDC - 24VDC independently controlled outputs or eight (8) independently controlled Form “C” relay outputs:
        • b) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.
        • c) Auxiliary power outputs (unswitched).
        • d) Any combination of the above.
        • Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2.
        • Individual outputs may be set to OFF position for servicing.
      • Outputs Ratings
        • PTCs: 2.5A.
      • Indicators (LED's)
        • Red LEDs: Outputs are triggered (relays energized).
        • Blue LED: FACP disconnect is triggered.
        • Out1 - Out8: Bi-colored LEDs indicate 12 or 24VDC
  • Environmental
      • Temperature
        • Operating: 0° C to 49° C (32° F to 120° F).
        • Storage: - 20° C to 70° C ( - 4° F to 158° F).
      • Relative Humidity
        • Relative Humidity: 85% +/- 5%.
      • BTU/Hr. (approx.):
        • 116 BTU/Hr.
 
CE Compliant
 
Components of this Trove kit are UL Listed sub-assemblies. Please refer to the corresponding Sub-Assembly Installation Guides for further information. Sub-assembly components of this kit can be found under the "Kit Contents" tab.
 
TAA Compliant
 
NDAA Compliant
 
BAA Compliant
Name Qty Description Agency Listings
Trove2 1 Access and Power Integration Enclosure, Requires compatible Trove2 Series Backplane
TSF2 1 Trove2 Backplane for Altronix/Swiftlane
Tango1B 2 PoE Driven Power Supply with Lithium Battery Backup, Board
ACMS8CB 2 Dual Input Access Power Controller, 8 PTC Protected Outputs, Board
NetWay5A 1 5-Port Hardened Switch Board
BR1 1 Add-On Mounting Bracket
Enclosure:
  • Wall mount enclosure for indoor use.
  • Dimensions 21.5"W x 27.25"H x 6.5"D (546.1 mm W x 692.15 mm H x 165.1 mm D).
  • 3/4" and 1" combination knockouts.
Weights (approximate):
  • Product Weight: 56.7 Lbs. (25.7 kg).
  • Shipping Weight: 61.7 Lbs. (28.4 kg).
Print

Access controllers not included

Documentation
Lifetime Warranty Locate a Distributor