T3VK7520V

20-Door Altronix/HID VertX® Access and Power Integration Kit - Trove3V3 with AL1024XB2V, AL1012XB220, (2) ACM8, ACM4, PD8UL, RSB2

Altronix T3VK7520V kit consists of Trove3 enclosure, TV3 VertX®/Altronix backplane with one (1) 24VDC @ 10A and one (1) 12VDC @ 10A power supply/chargers, two (2) 8-output fused access power controllers, one (1) 4-output fused access power controller and one (1) 8-output fused power distribution module. Also featured is a rocker switch bracket with two (2) rocker switches.
This kit also accommodate up to ten (10) HID Aero/VertX® modules for up to twenty (20) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

  • AL1024XB2V Power Supply/Charger - 1
      • Input
        • Voltage: 220VAC (working range 198VAC-256VAC), 50/60Hz, 2.5A.
        • Fusing: 5A / 250V.
      • Outputs
        • Voltage: 24VDC.
        • Current: 10A @ 24VDC continuous max.
        • Other: Overvoltage protection. Filtered and regulated.
  • AL1012XB220 Power Supply/Charger - 2
      • Input
        • Voltage: 220VAC (working range 198VAC-256VAC), 50/60Hz, 1.3A.
        • Fusing: 5A / 250V.
      • Outputs
        • Voltage: 12VDC.
        • Current: 10A @ 12VDC continuous max.
        • Other: Overvoltage protection. Filtered and regulated.
  • Both Power Supplies
      • Battery Charging
      • Capacity: 7AH/12VDC (4 within enclosure) 40AH/65AH (requires separate enclosure).
      • Type: Sealed lead acid or gel type.
      • Failover: Upon AC loss, instantaneous.
      • (Batteries are sold separately).
    • Supervision
      • AC Failure: Form “C” contacts.
      • Battery: Form “C” contacts.
    • Indicators LED
      • Input: 220VAC is present.
      • DC Output: Powered.
      • Battery: Discharged or not connected.
    • Two (2) ACM8 Access Power Controllers
        • Input
          • Voltage: 24VDC from AL1024XB2V.
          • Main Fuse: 10A / 250V.
        • Outputs
          • Voltage: 24VDC.
          • Eight (8) independently controlled fused outputs:
          • a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
          • b) Auxiliary power outputs (unswitched).
          • c) Any combination of the above.
          • Output Fuses: 3.5A / 250V.
        • Indicators (LED)
          • Red LEDs: Outputs are triggered (relays energized).
          • Green LED: FACP disconnect is triggered.
    • ACM4 Access Power Controller
        • Input
          • Voltage: 24VDC from AL1024XB2V.
          • Input Fuse: 10A /32V.
        • Outputs
          • Voltage: 24VDC.
          • Four (4) independently controlled fused outputs:
          • a) Four (4) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
          • b) Auxiliary power outputs (unswitched).
          • c) Any combination of the above.
          • Output Fuses: 3A / 32V.
        • Indicators (LED)
          • Red LEDs: Outputs are triggered (relays energized).
          • Green LED: FACP disconnect is triggered.
    • PD8UL Power Distribution Module
        • Input
          • Voltage: 12VDC from AL1012XB220.
        • Outputs
          • Voltage: 12VDC.
          • Eight (8) fuse protected outputs 3.5A per output max.
          • Fuses: 3.5A/250V.
        • Indicators LED
          • Green LED: DC Output.
    • Environmental
        • Temperature
          • Operating: 0° C to 49° C (32° F to 120° F).
          • Storage: - 20° C to 70° C ( - 4° F to 158° F).
        • Relative Humidity
          • Relative Humidity: 85% +/- 5%.
        • BTU/Hr. (approx.):
          • 177 BTU/Hr.
     
    CE Compliant
     
    Components of this Trove kit are UL Listed sub-assemblies. Please refer to the corresponding Sub-Assembly Installation Guides for further information. Sub-assembly components of this kit can be found under the "Kit Contents" tab.
    Name Qty Description Agency Listings
    Trove3 1 Access and Power Integration Enclosure, Requires compatible Trove3 Series Backplane
    TV3 1 Trove3 Backplane for Altronix/HID-Vertx
    AL1024XB2V 1 Power Supply Charger, Single Fused Output, 24VDC @ 10A, 220VAC, Board
    AL1012XB220 1 Power Supply Charger, Single Fused Output, 12VDC @ 10A, 220VAC, Board
    ACM8 2 Access Power Controller, 8 Fused Relay Outputs, FAI, Board
    ACM4 1 Access Power Controller, 4 Fused Relay Outputs, FAI, Board
    PD8UL 1 Power Distribution Module, 8 Fused Outputs up to 28VAC/VDC, Board
    RSB2 1 Dual Power ON/OFF Rocker Switches with Mounting Bracket
    Enclosure:
    • Wall mount enclosure for indoor use.
    • Accommodates up to four (4) 12VDC/12AH Batteries.
    • Dimensions 30.12"W x 36.12"H x 7.06"D (768.1 mm W x 917.5 mm H x 179.3 mm D).
    • 3/4" and 1" combination knockouts.
    Weights (approximate):
    • Product Weight: 85 Lbs. (38.6 kg).
    • Shipping Weight: 92 Lbs. (41.73 kg).
    Configure Trove Print

    Access controllers not included

    *Batteries sold separately
    Documentation A&E Specs
    Lifetime Warranty Locate a Distributor